Search

This kit is built for 1-2 users living in their vehicle full time. Producing enough power for moderate users.

Moderate users are people that run a variety of electrical appliances, including but not limited to:

• Lights,
• Fans,
• Fridges and Freezers,
• Diesel Heaters,
• Induction Cookers,
• Laptops and TV's,
• Consoles

This kit is NOT suitable for users that:

• Run Electrical heat
• Run Electrical water heating
• Ovens

You will want a High Use kit if you are running the above.

This kit comes with:

• 2x 210W Mono Crystalline Solar Panel
• 1x 2kw Low Frequency Inverter, 35A Charger and 60A MPPT Solar Charge Controller Combo Unit
• 2x 150 Ah 12v Standard Lithium (LiFePO4) Battery
• 2x 15 ft of PV wire (Red and Black)
• 2x Battery Connectors
• 1x 1.5ft of 4 Awg Battery Wires, to connect batteries together in parallel
• 1x 200A ANL Fuse, for inverter
• 1x 40A 72V Breaker, for Solar Panels
• 2x Solar Panel mounts
• 2x 10 Awg wire connectors for PV wire to connect to breaker
• 2x 4 Awg Wire connectors for ANL Fuse

Half-cell monocrystalline solar panels offer multiple advantages over traditional panels. By dividing each cell into two smaller cells connected in series, these panels minimize current and resistance losses, resulting in higher efficiency and better performance. They exhibit improved shade tolerance, generating power even when partially shaded, and have enhanced durability due to reduced mechanical stress. With a higher power output per unit area and a lower temperature coefficient, they excel in various environmental conditions, making them ideal for large installations. Additionally, their design reduces the risk of hotspots and ensures efficient power generation, making them a valuable choice for those seeking higher efficiency and reliability in solar energy systems.

Model	SM60M-210
Maximum Power (Pmax/W)	210
Operating Voltage (Vmpp/V)	18.2
Operating Current (Impp/A)	11.55
Open-Circuit Voltage (Voc/V)	21.85
Short-Circuit Current (Isc/A)	12.24
Module Efficiency %	21.13%
Power Tolerance	0+3 Wp
NOCT	45±2°C

Specifications

Cell Type	Monocrystalline
Cell size	182x91mm
Number of Cells	60
Weight	10 kg
Front Glass	3.2mm hardened solar tempered glass
Dimensions	1,445 x 765 x 30 mm
Cable length	900mm
Cable cross section size	4 mm²/12 awg
Connectors	MC4/IP67
Frame	Anodized Aluminium Alloy
IP Rating	IP67
Maximum Voltage	1000v
Maximum Reverse Current	15A
Number of bypass diodes	3
Junction box protection	TUV Certified/IP65

10 Year Warranty