Inverters and Chargers

Sort By:  
2000 Watts of power and 4000 Watt surge will be enough for most RV and camping needs.
$349CAD
3000W Pure Sine Wave Inverter
3000W inverter with a surge capability of 6000W, this will support the largest of RV/Campers.
$429CAD
40A DC to DC Charger dimensions
Keep your alternator safe and prolong the life of your valuable deep cycle batteries
$179CAD
Save time and space. Simplify your electrical with an all in one unit!
$1,149CAD
Inverter Charger Top
A Long lasting, powerful and efficient inverter with a built in 35A Charger
$799CAD
60A DC to DC Charger top
Keep your alternator safe and prolong the life of your valuable deep cycle batteries
$229CAD
12v to 110v AC 2000 Watt Pure Sine Wave Inverter (ENCI-PSW-12-2000)
2000 Watts of power and 4000 Watt surge will be enough for most RV and camping needs.

Pure sine wave inverters will give you a true sine wave AC current so your appliances will work efficiently and without a humming noise you may get with other inverters

Specifications:
Pure Sine Wave
Continuous Power: 2000W
Overload Power: 2400W
Input Voltage: 12VDC
Output Voltage: 110 VAC
Surge Power: 4000w
Efficiency: 88%
Frequency: 60 Hz
Battery Low Alarm: 10.5V ± 0.5 VDC
Battery Low Shutdown: 10.0V ± 0.5 VDC
Over Voltage Shutdown: 16.5±1VDC
Cooling fan: Thermally Controlled
USB Power port: 5v/2.1A
Safety Features:
  • Overload
  • Over-voltage
  • Low Voltage
  • Overheat
  • Short Circuit
  • Antipolarity
Certificates: ETL Listed to UL 458, FCC, CE, E-MARK, ROHS

Product Dimensions:
Centimeters (cm)Inches
Length39.515.6
Width24.59.6
Height10.54.1


1 Year Warranty
2000 Watts of power and 4000 Watt surge will be enough for most RV and camping needs.
$349CAD
3000W Pure Sine Wave Inverter
12v to 110v AC 3000 Watt Pure Sine Wave Inverter (SFE-INV-3000P)
3000W inverter to power your whole RV without worry of overloading the inverter. Can simultaneously power a space heater, fridge, freezer, lights and water pump

Pure sine wave inverters will give you a true sine wave AC current so your appliances will work efficiently and without a humming noise you may get with other inverters.

Specifications:
Pure Sine Wave
Continuous Power: 3000W
Overload Power: 3600W
Input Voltage: 12VDC
Output Voltage: 110 VAC
Surge Power: 6000w
Efficiency: 88%
Frequency: 60 Hz
Battery Low Alarm: 10.5V ± 0.5 VDC
Battery Low Shutdown: 10.0V ± 0.5 VDC
Over Voltage Shutdown: 16.5±1VDC
Cooling fan: Thermally Controlled
USB Power port: 5v/2.1A
Safety Features:
  • Overload
  • Over-voltage
  • Low Voltage
  • Overheat
  • Short Circuit
  • Antipolarity
Certificates: ETL Listed to UL 458, FCC, CE, E-MARK, ROHS

Product Dimensions:
Centimeters (cm)Inches
Length46.518.3
Width24.59.6
Height10.54.1


1 Year Warranty
3000W inverter with a surge capability of 6000W, this will support the largest of RV/Campers.
$429CAD
40A DC to DC Charger dimensions
40A DC to DC Charger for Lithium, Lead Acid, AGM, Gel Batteries (ENCI-DCDC-12-40)

The DC-DC series battery chargers are the most effective way to charge your auxiliary or house batteries from the alternator/starter battery. Compatible with a multitude of alternator types, the DC-DC offers correct charging for AGM, Flooded, Gel and even Lithium batteries. Featuring a three-stage charger and multiple electronic protections, owners can feel confident that their batteries are being charged optimally and automatically.  The compact yet sturdy design is easy to install, on RV's, commercial vehicles, boats, yachts and more

 

Key Features

1. Compatible with multiple 12v batteries: AGM, Flooded, Gel, and Lithium

2. Smart protections features including over-voltage, over-temperature, and reverse polarity.

3. Battery isolation and battery charger in one

4. Compact yet built tough for all conditions

5. Three-stage battery charger get your battery to 100%.

6. Charging output can be halved to 20A if required.



Product Dimensions:

Centimeters (cm)Inches
Length2610.2
Width18.47.2
Height7.53



1 Year Warranty

Keep your alternator safe and prolong the life of your valuable deep cycle batteries
$179CAD
Hybrid Solar Inverter 2000W/3000W (Inverter+Charger+MPPT) (FTS-20212M60, FTS-30212M60)
Are you looking for a space-saving and efficient solution for your camper van's electrical system? Consider an all-in-one unit that combines the functions of an inverter, charger, and MPPT controller. By using a single device for multiple functions, you can save valuable space in your van and simplify your electrical setup. Plus, an all-in-one unit can be more efficient than separate devices, which can save you money on energy costs in the long run. With seamless integration, compatibility, and a simple control panel, an all-in-one unit can provide the ideal solution for your camper van's electrical needs.

Inverter

We have two models available, one is a 2000W inverter with a 6000W peak and the other is a 3000W inverter with a 9000W peak. Has a universal outlet that accepts plugs from North America, Europe or UK. Also has a DIY AC terminal for you to wire in AC to your own distribution block. Has an automatic, built-in transfer switch for seamless transition between line power and battery inverter mode to not interrupt any of your devices. This device is a LOW frequency inverter, having the advantages of more reliability and higher peak output.

Charger

When the device is connected to shore or line power, it will use line power to charge your battery at up to 35A. It is compatible with all battery types including AGM, SLA, GEL, Lithium-ion (including LiFePO4) or your own custom battery packs.

MPPT Solar Charge Controller

This device has a high efficiency, 99%, MPPT Solar charge controller built in! Connect up to 900W of solar panels with a voltage range of 12v to 150v. This will let you connect you solar panel in series to increase voltage and reduce your wiring costs, while still maintaining peak efficiency charging from your solar panels.

Accessories - NOT INCLUDED
WiFi Module - IoT Device that lets you control and monitor the device via WiFi on your phone. Can adjust settings for easy setup. Also has cloud monitoring options.
External Screen (Remote) - An extendable screen and remote that comes with a 5m (16.4 ft) cable, letting you monitor and control your device.

Product Specifications
MODEL
FTS-20212M60
FTS-30212M60
RATED POWER
2KW
3KW
SURGE POWER
6KW
9KW
INPUT
INPUT VOLTAGE
93-147VAC
FREQUENCY RANGE
60HZ±5Hz
OUTPUT
INVERTER AC OUTPUT (FROM BATTERY)
120VAC±3%, 60Hz±0.5Hz
TRANSFER TIME
≤5ms
WAVE FORM
PURE SINE WAVE
BATTERY
BATTERY VOLTAGE
12V
FLOATING CHARGE VOLTAGE (ADJUSTABLE)
13.8V(12V)
OVERCHARGE PROTECTION (ADJUSTABLE)
17V(12V)
SOLAR CHARGE & AC CHARGER
MAXIMUM PV ARRAY OPEN CIRCUIT VOLTAGE
150VDC
MAXIMUM PV ARRAY POWER
900W(12V)
STANDBY POWER CONSUMPTION
15W
MAXIMUM AC CHARGE CURRENT (ADJUSTABLE)
35A
MAXIMUM SOLAR CHARGE CURRENT (ADJUSTABLE)
60A(OPTIONAL)
MAXIMUM CHARGING CURRENT
95A
PHYSICAL
DIMENSION,L*W*H(MM)
460*296*196MM
G.W. (kg)
21kg
23kg
ENVIRONMENT
HUMIDITY
0~95%(NO CONDENSATION)
OPERATING TEMPERATURE
0~60℃
STORAGE TEMPERATURE
0~60℃
COMMUNICATION TYPE
RS485, AVAILABLE WITH WIFI BOX OR EXTERNAL CONTROL SCREEN

Modes of Operation:
Line priority mode - Prioritizes Shore power as the main supplier of power, it will charge, and pass through shore power to the outlets whenever there is shore power. This mode assumes you have unlimited shore power so it does not have a low voltage cut off, though your batteries inbuilt bms's should have this cut off regardless.
Battery mode - Uses BATTERIES as the priority, will not charge the batteries even when there is shore power. Generally won't use this unless you are purposely trying to discharge your batteries. Can set low voltage cut off and low voltage restore here, the default settings of 10.5v and 12.5v is fine, but can also adjust a little lower to 10v and 12v.
Eco mode - This cycles the inverter side of the unit on and off every 10 secs, uses very little power. Every ON cycle, it will check if there are any loads on the AC output, if there is a load about 150W, the inverter will stay on. If there is not, the inverter will keep cycling. Take note of this threshold as LED lights will not keep the inverter on. This mode charges as well.
Unattended Mode - Tries to balance everything, uses AC shore power as a priority, charges batteries when on shore power. Can set low voltage cut off and low voltage restore here, the default settings of 10.5v and 12.5v is fine, but can also adjust a little lower to 10v and 12v.
Generator mode - is the same as line power mode but more accepting of choppier sine waves. 

UL Listed - UL 1741

1 Year Manufacturer Warranty
Save time and space. Simplify your electrical with an all in one unit!
$1,149CAD
Inverter Charger Top
3000W and 35A Low Frequency Pure Sine Wave Inverter Charger (FT-30212)
Inverter

This is a 3000W inverter with a 9000W peak. Has a universal outlet that accepts plugs from North America, Europe or UK. Also has a DIY AC terminal for you to wire in AC to your own distribution block. Has an automatic, built-in transfer switch for seamless transition between line power and battery inverter mode to not interrupt any of your devices. This device is a LOW frequency inverter, having the advantages of more reliability and higher peak output.

Charger

When the device is connected to shore or line power, it will use line power to charge your battery at up to 35A. It is compatible with all battery types including AGM, SLA, GEL, Lithium-ion (including LiFePO4) or your own custom battery packs.

Accessories - NOT INCLUDED
WiFi Module - IoT Device that lets you control and monitor the device via WiFi on your phone. Can adjust settings for easy setup. Also has cloud monitoring options.
External Screen (Remote) - An extendable screen and remote that comes with a 5m (16.4 ft) cable, letting you monitor and control your device.

MODEL
FT-302
RATED POWER
3KW
SURGE POWER
9KW
INPUT
VOLTAGE
120VAC
FREQUENCY RANGE
60HZ±5HZ
OUTPUT
AC VOLTAGE REGULATION(BATT. MODE)
(DC BATT.MODE)120VAC±3%
TRANSFER TIME
≤5ms
WAVE FORM
PURE SINE WAVE
BATTERY
BATTERY VOLTAGE
12V
FLOATING CHARGE VOLTAGE
13.8V(12V)
OVERCHARGE PROTECTION
17V(12V)
AC CHARGER
STANDBY POWER COMSUMPTION
15W
MAXIMUM AC CHARGE CURRENT
35A
PHYSICAL
DIMENSION,D*W*H(MM)
530*335*250MM
G.W.(KGS)
26.8
ENVIRONMENT
HUMIDITY
0~95%(NO CONDESNSATION)
OPERATING TEMPERATURE
0~60℃
STORAGE TEMPERATURE
0~60℃

Modes of Operation:
Line priority mode - Prioritizes Shore power as the main supplier of power, it will charge, and pass through shore power to the outlets whenever there is shore power. This mode assumes you have unlimited shore power so it does not have a low voltage cut off, though your batteries inbuilt bms's should have this cut off regardless.
Battery mode - Uses BATTERIES as the priority, will not charge the batteries even when there is shore power. Generally won't use this unless you are purposely trying to discharge your batteries. Can set low voltage cut off and low voltage restore here, the default settings of 10.5v and 12.5v is fine, but can also adjust a little lower to 10v and 12v.
Eco mode - This cycles the inverter side of the unit on and off every 10 secs, uses very little power. Every ON cycle, it will check if there are any loads on the AC output, if there is a load about 150W, the inverter will stay on. If there is not, the inverter will keep cycling. Take note of this threshold as LED lights will not keep the inverter on. This mode charges as well.
Unattended Mode - Tries to balance everything, uses AC shore power as a priority, charges batteries when on shore power. Can set low voltage cut off and low voltage restore here, the default settings of 10.5v and 12.5v is fine, but can also adjust a little lower to 10v and 12v.
Generator mode - is the same as line power mode but more accepting of choppier sine waves. 

UL Listed - UL 1741

1 Year Manufacturer Warranty
A Long lasting, powerful and efficient inverter with a built in 35A Charger
$799CAD
60A DC to DC Charger top
60A DC to DC Charger for Lithium, Lead Acid, AGM, Gel Batteries (ENCI-DCDC-12-60)

The DC-DC series battery chargers are the most effective way to charge your auxiliary or house batteries from the alternator/starter battery. Compatible with a multitude of alternator types, the DC-DC offers correct charging for AGM, Flooded, Gel and even Lithium batteries. Featuring a three-stage charger and multiple electronic protections, owners can feel confident that their batteries are being charged optimally and automatically.  The compact yet sturdy design is easy to install, on RV's, commercial vehicles, boats, yachts and more

 

Key Features

1. Compatible with multiple 12v batteries: AGM, Flooded, Gel, and Lithium

2. Smart protections features including over-voltage, over-temperature, and reverse polarity.

3. Battery isolation and battery charger in one

4. Compact yet built tough for all conditions

5. Three-stage battery charger get your battery to 100%.

6. Charging output can be halved to 30A if required.



Product Dimensions:

Centimeters (cm)Inches
Length3112.2
Width18.47.2
Height73



1 Year Warranty

Keep your alternator safe and prolong the life of your valuable deep cycle batteries
$229CAD
Per Page      1 - 6 of 6
  • 1