Hybrid Solar Inverter 2000W/3000W (Inverter+Charger+MPPT)

Save time and space. Simplify your electrical with an all in one unit!
$1,149CAD
*
Qty:
Are you looking for a space-saving and efficient solution for your camper van's electrical system? Consider an all-in-one unit that combines the functions of an inverter, charger, and MPPT controller. By using a single device for multiple functions, you can save valuable space in your van and simplify your electrical setup. Plus, an all-in-one unit can be more efficient than separate devices, which can save you money on energy costs in the long run. With seamless integration, compatibility, and a simple control panel, an all-in-one unit can provide the ideal solution for your camper van's electrical needs.

Inverter

We have two models available, one is a 2000W inverter with a 6000W peak and the other is a 3000W inverter with a 9000W peak. Has a universal outlet that accepts plugs from North America, Europe or UK. Also has a DIY AC terminal for you to wire in AC to your own distribution block. Has an automatic, built-in transfer switch for seamless transition between line power and battery inverter mode to not interrupt any of your devices. This device is a LOW frequency inverter, having the advantages of more reliability and higher peak output.

Charger

When the device is connected to shore or line power, it will use line power to charge your battery at up to 35A. It is compatible with all battery types including AGM, SLA, GEL, Lithium-ion (including LiFePO4) or your own custom battery packs.

MPPT Solar Charge Controller

This device has a high efficiency, 99%, MPPT Solar charge controller built in! Connect up to 900W of solar panels with a voltage range of 12v to 150v. This will let you connect you solar panel in series to increase voltage and reduce your wiring costs, while still maintaining peak efficiency charging from your solar panels.

Accessories - NOT INCLUDED
WiFi Module - IoT Device that lets you control and monitor the device via WiFi on your phone. Can adjust settings for easy setup. Also has cloud monitoring options.
External Screen (Remote) - An extendable screen and remote that comes with a 5m (16.4 ft) cable, letting you monitor and control your device.

Product Specifications
MODEL
FTS-20212M60
FTS-30212M60
RATED POWER
2KW
3KW
SURGE POWER
6KW
9KW
INPUT
INPUT VOLTAGE
93-147VAC
FREQUENCY RANGE
60HZ±5Hz
OUTPUT
INVERTER AC OUTPUT (FROM BATTERY)
120VAC±3%, 60Hz±0.5Hz
TRANSFER TIME
≤5ms
WAVE FORM
PURE SINE WAVE
BATTERY
BATTERY VOLTAGE
12V
FLOATING CHARGE VOLTAGE (ADJUSTABLE)
13.8V(12V)
OVERCHARGE PROTECTION (ADJUSTABLE)
17V(12V)
SOLAR CHARGE & AC CHARGER
MAXIMUM PV ARRAY OPEN CIRCUIT VOLTAGE
150VDC
MAXIMUM PV ARRAY POWER
900W(12V)
STANDBY POWER CONSUMPTION
15W
MAXIMUM AC CHARGE CURRENT (ADJUSTABLE)
35A
MAXIMUM SOLAR CHARGE CURRENT (ADJUSTABLE)
60A(OPTIONAL)
MAXIMUM CHARGING CURRENT
95A
PHYSICAL
DIMENSION,L*W*H(MM)
460*296*196MM
G.W. (kg)
21kg
23kg
ENVIRONMENT
HUMIDITY
0~95%(NO CONDENSATION)
OPERATING TEMPERATURE
0~60℃
STORAGE TEMPERATURE
0~60℃
COMMUNICATION TYPE
RS485, AVAILABLE WITH WIFI BOX OR EXTERNAL CONTROL SCREEN

Modes of Operation:
Line priority mode - Prioritizes Shore power as the main supplier of power, it will charge, and pass through shore power to the outlets whenever there is shore power. This mode assumes you have unlimited shore power so it does not have a low voltage cut off, though your batteries inbuilt bms's should have this cut off regardless.
Battery mode - Uses BATTERIES as the priority, will not charge the batteries even when there is shore power. Generally won't use this unless you are purposely trying to discharge your batteries. Can set low voltage cut off and low voltage restore here, the default settings of 10.5v and 12.5v is fine, but can also adjust a little lower to 10v and 12v.
Eco mode - This cycles the inverter side of the unit on and off every 10 secs, uses very little power. Every ON cycle, it will check if there are any loads on the AC output, if there is a load about 150W, the inverter will stay on. If there is not, the inverter will keep cycling. Take note of this threshold as LED lights will not keep the inverter on. This mode charges as well.
Unattended Mode - Tries to balance everything, uses AC shore power as a priority, charges batteries when on shore power. Can set low voltage cut off and low voltage restore here, the default settings of 10.5v and 12.5v is fine, but can also adjust a little lower to 10v and 12v.
Generator mode - is the same as line power mode but more accepting of choppier sine waves. 

UL Listed - UL 1741

1 Year Manufacturer Warranty