Search
Search Criteria
Products meeting the search criteria
12v to 110v AC 2000 Watt Pure Sine Wave Inverter (ENCI-PSW-12-2000)
2000 Watts of power and 4000 Watt surge will be enough for most RV and camping needs.
Pure sine wave inverters will give you a true sine wave AC current so your appliances will work efficiently and without a humming noise you may get with other inverters
Specifications:
Pure Sine Wave
Continuous Power: 2000W
Overload Power: 2400W
Input Voltage: 12VDC
Output Voltage: 110 VAC
Surge Power: 4000w
Efficiency: 88%
Frequency: 60 Hz
Battery Low Alarm: 10.5V ± 0.5 VDC
Battery Low Shutdown: 10.0V ± 0.5 VDC
Over Voltage Shutdown: 16.5±1VDC
Cooling fan: Thermally Controlled
USB Power port: 5v/2.1A
Safety Features:
Product Dimensions:
1 Year Warranty
Pure sine wave inverters will give you a true sine wave AC current so your appliances will work efficiently and without a humming noise you may get with other inverters
Specifications:
Pure Sine Wave
Continuous Power: 2000W
Overload Power: 2400W
Input Voltage: 12VDC
Output Voltage: 110 VAC
Surge Power: 4000w
Efficiency: 88%
Frequency: 60 Hz
Battery Low Alarm: 10.5V ± 0.5 VDC
Battery Low Shutdown: 10.0V ± 0.5 VDC
Over Voltage Shutdown: 16.5±1VDC
Cooling fan: Thermally Controlled
USB Power port: 5v/2.1A
Safety Features:
- Overload
- Over-voltage
- Low Voltage
- Overheat
- Short Circuit
- Antipolarity
Product Dimensions:
| Centimeters (cm) | Inches | |
| Length | 39.5 | 15.6 |
| Width | 24.5 | 9.6 |
| Height | 10.5 | 4.1 |
1 Year Warranty
2000 Watts of power and 4000 Watt surge will be enough for most RV and camping needs.
12v to 110v AC 3000 Watt Pure Sine Wave Inverter (SFE-INV-3000P)
3000W inverter to power your whole RV without worry of overloading the inverter. Can simultaneously power a space heater, fridge, freezer, lights and water pump
Pure sine wave inverters will give you a true sine wave AC current so your appliances will work efficiently and without a humming noise you may get with other inverters.
Specifications:
Pure Sine Wave
Continuous Power: 3000W
Overload Power: 3600W
Input Voltage: 12VDC
Output Voltage: 110 VAC
Surge Power: 6000w
Efficiency: 88%
Frequency: 60 Hz
Battery Low Alarm: 10.5V ± 0.5 VDC
Battery Low Shutdown: 10.0V ± 0.5 VDC
Over Voltage Shutdown: 16.5±1VDC
Cooling fan: Thermally Controlled
USB Power port: 5v/2.1A
Safety Features:
Product Dimensions:
1 Year Warranty
Pure sine wave inverters will give you a true sine wave AC current so your appliances will work efficiently and without a humming noise you may get with other inverters.
Specifications:
Pure Sine Wave
Continuous Power: 3000W
Overload Power: 3600W
Input Voltage: 12VDC
Output Voltage: 110 VAC
Surge Power: 6000w
Efficiency: 88%
Frequency: 60 Hz
Battery Low Alarm: 10.5V ± 0.5 VDC
Battery Low Shutdown: 10.0V ± 0.5 VDC
Over Voltage Shutdown: 16.5±1VDC
Cooling fan: Thermally Controlled
USB Power port: 5v/2.1A
Safety Features:
- Overload
- Over-voltage
- Low Voltage
- Overheat
- Short Circuit
- Antipolarity
Product Dimensions:
| Centimeters (cm) | Inches | |
| Length | 46.5 | 18.3 |
| Width | 24.5 | 9.6 |
| Height | 10.5 | 4.1 |
1 Year Warranty
3000W inverter with a surge capability of 6000W, this will support the largest of RV/Campers.
300 Ah Battery, 2000W Inverter, 60A MPPT, 35A Charger, 420W Solar Panel kit (420s2000i300st)
This kit is built for 1-2 users living in their vehicle full time. Producing enough power for moderate users.
Moderate users are people that run a variety of electrical appliances, including but not limited to:
This kit is NOT suitable for users that:
You will want a High Use kit if you are running the above.
This kit comes with:
Moderate users are people that run a variety of electrical appliances, including but not limited to:
- Lights,
- Fans,
- Fridges and Freezers,
- Diesel Heaters,
- Induction Cookers,
- Laptops and TV's,
- Consoles
This kit is NOT suitable for users that:
- Run Electrical heat
- Run Electrical water heating
- Ovens
You will want a High Use kit if you are running the above.
This kit comes with:
- 2x 210W Mono Crystalline Solar Panel
- 1x 2kw Low Frequency Inverter, 35A Charger and 60A MPPT Solar Charge Controller Combo Unit
- 2x 150 Ah 12v Standard Lithium (LiFePO4) Battery
- 2x 15 ft of PV wire (Red and Black)
- 2x Battery Connectors
- 1x 1.5ft of 4 Awg Battery Wires, to connect batteries together in parallel
- 1x 200A ANL Fuse, for inverter
- 1x 40A 72V Breaker, for Solar Panels
- 2x Solar Panel mounts
- 2x 10 Awg wire connectors for PV wire to connect to breaker
- 2x 4 Awg Wire connectors for ANL Fuse
This kit is built for 1-2 users living in their vehicle full time. Producing enough power for moderate users. This has enough power to run any standard household appliance and has enough battery back up to last 3-5 days
3000W and 35A Low Frequency Pure Sine Wave Inverter Charger (FT-30212)
Inverter
This is a 3000W inverter with a 9000W peak. Has a universal outlet that accepts plugs from North America, Europe or UK. Also has a DIY AC terminal for you to wire in AC to your own distribution block. Has an automatic, built-in transfer switch for seamless transition between line power and battery inverter mode to not interrupt any of your devices. This device is a LOW frequency inverter, having the advantages of more reliability and higher peak output.
Charger
When the device is connected to shore or line power, it will use line power to charge your battery at up to 35A. It is compatible with all battery types including AGM, SLA, GEL, Lithium-ion (including LiFePO4) or your own custom battery packs.
Modes of Operation:
Line priority mode - Prioritizes Shore power as the main supplier of power, it will charge, and pass through shore power to the outlets whenever there is shore power. This mode assumes you have unlimited shore power so it does not have a low voltage cut off, though your batteries inbuilt bms's should have this cut off regardless.
UL Listed - UL 1741
1 Year Manufacturer Warranty
This is a 3000W inverter with a 9000W peak. Has a universal outlet that accepts plugs from North America, Europe or UK. Also has a DIY AC terminal for you to wire in AC to your own distribution block. Has an automatic, built-in transfer switch for seamless transition between line power and battery inverter mode to not interrupt any of your devices. This device is a LOW frequency inverter, having the advantages of more reliability and higher peak output.
Charger
When the device is connected to shore or line power, it will use line power to charge your battery at up to 35A. It is compatible with all battery types including AGM, SLA, GEL, Lithium-ion (including LiFePO4) or your own custom battery packs.
MODEL | FT-302 |
RATED POWER | 3KW |
SURGE POWER | 9KW |
INPUT | |
VOLTAGE | 120VAC |
FREQUENCY RANGE | 60HZ±5HZ |
OUTPUT | |
AC VOLTAGE REGULATION(BATT. MODE) | (DC BATT.MODE)120VAC±3% |
TRANSFER TIME | ≤5ms |
WAVE FORM | PURE SINE WAVE |
BATTERY | |
BATTERY VOLTAGE | 12V |
FLOATING CHARGE VOLTAGE | 13.8V(12V) |
OVERCHARGE PROTECTION | 17V(12V) |
AC CHARGER | |
STANDBY POWER COMSUMPTION | 15W |
MAXIMUM AC CHARGE CURRENT | 35A |
PHYSICAL | |
DIMENSION,D*W*H(MM) | 530*335*250MM |
G.W.(KGS) | 26.8 |
ENVIRONMENT | |
HUMIDITY | 0~95%（NO CONDESNSATION) |
OPERATING TEMPERATURE | 0~60℃ |
STORAGE TEMPERATURE | 0~60℃ |
Modes of Operation:
Line priority mode - Prioritizes Shore power as the main supplier of power, it will charge, and pass through shore power to the outlets whenever there is shore power. This mode assumes you have unlimited shore power so it does not have a low voltage cut off, though your batteries inbuilt bms's should have this cut off regardless.
Battery mode - Uses BATTERIES as the priority, will not charge the batteries even when there is shore power. Generally won't use this unless you are purposely trying to discharge your batteries. Can set low voltage cut off and low voltage restore here, the default settings of 10.5v and 12.5v is fine, but can also adjust a little lower to 10v and 12v.
Eco mode - This cycles the inverter side of the unit on and off every 10 secs, uses very little power. Every ON cycle, it will check if there are any loads on the AC output, if there is a load about 150W, the inverter will stay on. If there is not, the inverter will keep cycling. Take note of this threshold as LED lights will not keep the inverter on. This mode charges as well.
Unattended Mode - Tries to balance everything, uses AC shore power as a priority, charges batteries when on shore power. Can set low voltage cut off and low voltage restore here, the default settings of 10.5v and 12.5v is fine, but can also adjust a little lower to 10v and 12v.
Generator mode - is the same as line power mode but more accepting of choppier sine waves.
UL Listed - UL 1741
1 Year Manufacturer Warranty
A Long lasting, powerful and efficient inverter with a built in 35A Charger
Hybrid Solar Inverter 2000W/3000W (Inverter+Charger+MPPT) (FTS-20212M60, FTS-30212M60)
Are you looking for a space-saving and efficient solution for your camper van's electrical system? Consider an all-in-one unit that combines the functions of an inverter, charger, and MPPT controller. By using a single device for multiple functions, you can save valuable space in your van and simplify your electrical setup. Plus, an all-in-one unit can be more efficient than separate devices, which can save you money on energy costs in the long run. With seamless integration, compatibility, and a simple control panel, an all-in-one unit can provide the ideal solution for your camper van's electrical needs.
Inverter
We have two models available, one is a 2000W inverter with a 6000W peak and the other is a 3000W inverter with a 9000W peak. Has a universal outlet that accepts plugs from North America, Europe or UK. Also has a DIY AC terminal for you to wire in AC to your own distribution block. Has an automatic, built-in transfer switch for seamless transition between line power and battery inverter mode to not interrupt any of your devices. This device is a LOW frequency inverter, having the advantages of more reliability and higher peak output.
Charger
When the device is connected to shore or line power, it will use line power to charge your battery at up to 35A. It is compatible with all battery types including AGM, SLA, GEL, Lithium-ion (including LiFePO4) or your own custom battery packs.
MPPT Solar Charge Controller
This device has a high efficiency, 99%, MPPT Solar charge controller built in! Connect up to 900W of solar panels with a voltage range of 12v to 150v. This will let you connect you solar panel in series to increase voltage and reduce your wiring costs, while still maintaining peak efficiency charging from your solar panels.
Product Specifications
Modes of Operation:
Line priority mode - Prioritizes Shore power as the main supplier of power, it will charge, and pass through shore power to the outlets whenever there is shore power. This mode assumes you have unlimited shore power so it does not have a low voltage cut off, though your batteries inbuilt bms's should have this cut off regardless.
UL Listed - UL 1741
1 Year Manufacturer Warranty
Inverter
We have two models available, one is a 2000W inverter with a 6000W peak and the other is a 3000W inverter with a 9000W peak. Has a universal outlet that accepts plugs from North America, Europe or UK. Also has a DIY AC terminal for you to wire in AC to your own distribution block. Has an automatic, built-in transfer switch for seamless transition between line power and battery inverter mode to not interrupt any of your devices. This device is a LOW frequency inverter, having the advantages of more reliability and higher peak output.
Charger
When the device is connected to shore or line power, it will use line power to charge your battery at up to 35A. It is compatible with all battery types including AGM, SLA, GEL, Lithium-ion (including LiFePO4) or your own custom battery packs.
MPPT Solar Charge Controller
This device has a high efficiency, 99%, MPPT Solar charge controller built in! Connect up to 900W of solar panels with a voltage range of 12v to 150v. This will let you connect you solar panel in series to increase voltage and reduce your wiring costs, while still maintaining peak efficiency charging from your solar panels.
Product Specifications
MODEL | FTS-20212M60 | FTS-30212M60 |
RATED POWER | 2KW | 3KW |
SURGE POWER | 6KW | 9KW |
INPUT | ||
INPUT VOLTAGE | 93-147VAC | |
FREQUENCY RANGE | 60HZ±5Hz | |
OUTPUT | ||
INVERTER AC OUTPUT (FROM BATTERY) | 120VAC±3%, 60Hz±0.5Hz | |
TRANSFER TIME | ≤5ms | |
WAVE FORM | PURE SINE WAVE | |
BATTERY | ||
BATTERY VOLTAGE | 12V | |
FLOATING CHARGE VOLTAGE (ADJUSTABLE) | 13.8V(12V) | |
OVERCHARGE PROTECTION (ADJUSTABLE) | 17V(12V) | |
SOLAR CHARGE & AC CHARGER | ||
MAXIMUM PV ARRAY OPEN CIRCUIT VOLTAGE | 150VDC | |
MAXIMUM PV ARRAY POWER | 900W(12V) | |
STANDBY POWER CONSUMPTION | 15W | |
MAXIMUM AC CHARGE CURRENT (ADJUSTABLE) | 35A | |
MAXIMUM SOLAR CHARGE CURRENT (ADJUSTABLE) | 60A(OPTIONAL) | |
MAXIMUM CHARGING CURRENT | 95A | |
PHYSICAL | ||
DIMENSION,L*W*H(MM) | 460*296*196MM | |
G.W. (kg) | 21kg | 23kg |
ENVIRONMENT | ||
HUMIDITY | 0~95%（NO CONDENSATION) | |
OPERATING TEMPERATURE | 0~60℃ | |
STORAGE TEMPERATURE | 0~60℃ | |
COMMUNICATION TYPE | RS485, AVAILABLE WITH WIFI BOX OR EXTERNAL CONTROL SCREEN | |
Modes of Operation:
Line priority mode - Prioritizes Shore power as the main supplier of power, it will charge, and pass through shore power to the outlets whenever there is shore power. This mode assumes you have unlimited shore power so it does not have a low voltage cut off, though your batteries inbuilt bms's should have this cut off regardless.
Battery mode - Uses BATTERIES as the priority, will not charge the batteries even when there is shore power. Generally won't use this unless you are purposely trying to discharge your batteries. Can set low voltage cut off and low voltage restore here, the default settings of 10.5v and 12.5v is fine, but can also adjust a little lower to 10v and 12v.
Eco mode - This cycles the inverter side of the unit on and off every 10 secs, uses very little power. Every ON cycle, it will check if there are any loads on the AC output, if there is a load about 150W, the inverter will stay on. If there is not, the inverter will keep cycling. Take note of this threshold as LED lights will not keep the inverter on. This mode charges as well.
Unattended Mode - Tries to balance everything, uses AC shore power as a priority, charges batteries when on shore power. Can set low voltage cut off and low voltage restore here, the default settings of 10.5v and 12.5v is fine, but can also adjust a little lower to 10v and 12v.
Generator mode - is the same as line power mode but more accepting of choppier sine waves.
UL Listed - UL 1741
1 Year Manufacturer Warranty
Save time and space. Simplify your electrical with an all in one unit!
- 1